USHUS-2




March/24/2017 is a historical day for India


After England, USA, France and Israel; India is a fifth county which develops his own navigation system for ships. 
Secondly, after the democracy India first time export defence items. India gives three SONAR system USHUS-2 to Myanmar and the cost of this product is about 180 crore. USHUS-2  is developed by Naval Physical and Oceanographic Laboratory (NPOL), the only Defence Research and Research organisation (DRDO) lab in Kerala, India.
Union Defence and Finance minister  Mr Arun Jaitley handed over  10 USHUS-2 to Indian navy too.

 
USHUS-2


USHUS-2 is an integrated submarine sonar suite, a state-of-the-art upgraded of existing USHUS sonar presently operational on the frontline submarine of Navy. USHUS will replace Russian sonar system. It is designed and manufactured by DRDO. The range of USHUS-2 is about 100 to 150 kms. 

Comments

Post a Comment

Popular posts from this blog

Single LED Blinking program by ARDUINO

Image
//program for single LED blinking //by-ALOK KUMAR PANDEY //....................................................................................// int led = 13;                            //we difine pin number 13 as name led void setup()                            // this loop run sigle(one) time  {             pinMode(led,OUTPUT);        //here we difine pin no. 13 (i.e. led)as output pin } void loop() {                          //this loop run infinite times  digitalWrite(led, HIGH);      // here we set pin 13 (i.e. led) high, it means it get on  delay(1000);                        // one second delay  digitalWrite(led, LOW);     // here we set pin 13 (i.e. led) low, it means it get off  delay(1000);                     // again one second delay. }
Read more

Two LED blinking in pattern programming by ARDUINO

Image
//program for TWO LED blinking one by one //by-ALOK KUMAR PANDEY //....................................................................................// int led1 =13, led2 =12; void setup() {   pinMode(led1, OUTPUT);         // here pin 13(i.e. led1) set as output pin   pinMode(led2, OUTPUT);         // here pin 12(i.e. led2) set as output pin } void loop()  {   digitalWrite(led1, HIGH);      // here we set led1 as low(i.e. pin no. 13) it means led1 get on.   digitalWrite(led2, LOW);       // here we set led2 as high(i.e. pin no. 12) it means led1 get off.   delay(1000);   digitalWrite(led1,LOW);        // here we set led1 as low(i.e. pin no. 13) it means led1 get off.   digitalWrite(led2, HIGH);      // here we set led2 as high(i.e. pin no. 12) it means led1 get on.   delay(1000);       }
Read more